Page 1
SP-13 02/2023 KEY0005407-000 user manual...
Page 2
Intended use: The keymaXX SP-13 is a digital home keyboard, designed to play sounds on the keyboard and make them audible through built-in speakers or headphones. Improper use of the product is considered improper and can lead to personal injury or property damage. No liability is assumed for damage resulting from improper use.
Page 3
Important safety instructions! Please read before connection! CAUTION! (Electro Magnetic Interference) The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so, simply reset the product to resume normal operation by following the owner‘s manual. In case the function could not resume, please use the product in other location.
Page 4
Hint! (Operating conditions) Due to its structural characteristics, the device is designed for indoor operation (IP20). Never expose the device to rain, moisture or liquids as this may cause damage. Vibrations, dust or solar radiation can also lead to damage, avoid them! Do not apply excessive force to the switches or controls.
Page 5
Hint! (Interferences with other electrical devices) Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ...
Page 6
Cleaning: A regular cleaning of the device from impurities and dust increases the durability of the product. Always disconnect the device from the power supply before cleaning it! Never clean the appliance wet! Optical lenses should be cleaned with a dry microfiber cloth to optimize light output. Ventilation grilles and openings should always be cleaned of dust and dirt.
Page 7
KEYBOARD STAND ASSEMBLY (for optional stand & pedal unit) Be careful not to confuse any of the parts, and be sure to install all parts in the correct direction. Please assemble according to the sequence given below. Use only the screws provided when assembling the stand. Use of any other screws may result in an inadequate assembly that may cause damage to both the keyboard stand and the pedal unit.
PIANO ASSEMBLY Place keyboard on the stand and secure it to the brackets with 2 screws on each side Insert the music rest into the top slots of the piano Connect the pedal unit connector to the PEDAL UNIT socket at the rear of the piano Connect the supplied mains lead or power supply to the power socket at the rear of the piano...
OPERATION POWER ON/OFF Connect the AC power adaptor to the DC IN jack. Plug the AC power adaptor into an AC outlet. Flip the (Standby/On) switch to turn on the power. The power lamp lights up.To turn off the power, flip this switch again. VOLUME CONTROL When you start playing, use the [MASTER VOLUME] slider to adjust the volume of the entire keyboard sound.
USING THE METRONOME The metronome is convenient for practicing with an accurate tempo. While holding down the [FUNCTION] button, press the B6 key [METRONOME] to start the metronome. 2. Repeat the above process to stop the metronome. There are four different beats available for selection from 1/4 to 4/4 which can be accessed from keys E3 to A3.
USING THE SUSTAIN PEDAL To use the included sustain pedal CSP-005 simply plug it into the [SUSTAIN] socket at the back of your digital piano. Should the sustain effect be reversed, please flip the switch on the side of the sustain pedal. The sustain pedal works in the same way as a damper pedal on an acoustic piano.
Page 12
MP3 USB MEDIA PLAVER AND RECORDER This Digital Piano is equipped with a USB MP3 media player and recorder. You can use the media player and recorder with a standard formatted USB pen drive with a size of up to 8GB (pen drive not included).
USB MIDI INTERFACE Many digital musical instruments support the MIDI (Musical Instrument Digital Interface). With this technology, the instrument can communicate with a connected computer transmitting/receiving the MIDI data, including keyboard performance information and Song playback data. When connecting the computer to the USB TO HOST terminal, make sure to observe the following points.
Need help?
Do you have a question about the SP-13 and is the answer not in the manual?
Questions and answers