Installing The Wall Mount - VALBERG CYCLONIC S11 Instructions For Use Manual

B
Product usage
To remove the battery, press the battery release button and remove it.
To reposition the battery, slide it into its housing until it clicks into place.

Installing the wall mount

NOTE: Find a suitable location for the wall mount.
• Preferably install the wall mount near an mains socket.
• Only install the wall mount in a location where the ambient temperature is
constant and between +5 °C and 40 °C.
• Place it in a clean, dry place, away from heaters and direct sunlight.
• Make sure that the wall on which the wall mount will be secured is able to
support the weight of the unit and its accessories.
Place the wall mount on a wall. Make sure that the base of the wall mount is
approximately 83 cm above the floor so that the brush of the assembled stick vacuum
gently rests on the floor. Mark the drill holes for the screws with a pencil.
Then, drill the screw holes and insert the appropriate wall plugs. Place the wall
mount on a wall. Screw the mount to the wall.
DANGER! RISK OF ELECTRIC SHOCK!
• Do not pierce the electric cables (or water pipes) located in the wall.
• Do not install the wall mount on a metal wall.
Assembly/Disassembly
To assemble:
Attach the HEPA filter to the filter cover and rotate it clockwise towards the lock
symbol .
Slide the HEPA filter into the top of the handheld vacuum until it is firmly secured
into place.
Screw the central part of the filter into the dust cup on the lower part of the filter
system.
Insert the charged battery into the handheld vacuum until it clicks into place.
19 EN