Page 1
ASSEMBLY INSTRUCTIONS ITEM# D-FT914PST WARNINGS: This campfire ring is intended for outdoor use only. Do NOT use on wooden decks. DO NOT use in the vicinity of flammable objects. This campfire ring is intended to burn wood logs only.
Page 2
Parts List Part# Description Hanging bar Hanging bar Post Side panel Grill Poker Hook (long) Hook (medium) Hook (short) Hook (small) Assembly Steps: Step 1: Put the two Side panel (C) together by aligning Step 2: Insert Post (B) in to Side Panel (C), then pull the round tubes as shown on the magnifying figure Hanging bar (A1/A2) through Post (B) and connect the above.
Page 3
Step 3: Hang Poker (E) and all the hooks (F/G/H/I) on the hanging bars. Now your camp fire ring is ready for use. LIMITED WARRANTY: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes.
Need help?
Do you have a question about the D-FT914PST and is the answer not in the manual?
Questions and answers