Advertisement
Setting up your phone
Step 4. Replace the battery cover.
Replace the battery cover, making sure all the tabs are
secure and there are no gaps around the cover.
Using a coin, rotate the battery cover screw clockwise
until it is tight.
NOTE: Make sure you press all around the edges of the battery
cover to ensure your phone's waterproof seal is intact.
Step 5. Charge your phone.
Before turning on your phone, charge it fully.
NOTE: Only use a USB Type-C charger/cable for this phone.
Open the USB/Charger port cover.
Insert the small end of the USB cable into the USB/
Charger port. Insert the larger end into the AC adapter
and plug it into an outlet.
When charging is complete, remove the cable from the
port and securely close the cover.
USB Type-C cable
WARNING: Use only approved chargers and cables with your
phone. Improper handling of the charging port, as well as the use
of an incompatible charger or cable, may cause damage to your
device and void the warranty.
NOTE: Make sure the USB/Charger port cover is securely closed,
when the port is not in use, to keep the port clean and dry.
USB Type-C port
Advertisement
