Error Codes And Glossary; General Information Concerning Error Messages; Errorcodes - Atari SIO2USB User Manual

8. Error Codes and Glossary

8.1.

General Information concerning Error Messages

If an error occurs during data transmission or during the execution of com-
mands an errors message will be shown in the Shell. On errors during the
command execution the error-LED lights up briefly.
If a FAT structure error was detected, the red LED lights up and the error will
be shown in the Shell output. The red error-LED will stay lit.
Remark: the error LED will only stop lighting after a SIO2USB reset.
✖
If a FAT structure error is detected it is mandatory not to do any
write operations any more. Otherwise data could be corrupted on the
USB-media or the internal memory!
If the USB-stick is affected remove it and repair it using an utility program on a
PC or Mac.
If the internal memory is affected it has to be reformatted.
Warning: all data on the internal memory will be lost during format.
To format the internal memory the program from the disk image FORMAT.ATR
is used. This image is provided on the USB-stick.
After booting the image the program will start automatically. All functions are
described within the program. It is possible to format the USB-stick too. Like
described above, all data on the USB-stick will be lost during format!
8.2.

Errorcodes

Code Description
(Hex)
$00 No Error
$01 to $1F Transmission error
$20 FAT-structure error on internal memory
$21 FAT-structure error on USB memory
$20 FAT-structure error on internal memory
SIO2USB User Manual Chapter 8 Error Codes 31