Nokia 810 Installation Manual page 36

Settings
Note
The original factory setting for the delay time is five
seconds. Active call diverts are shown by an indicator on
the display. For further information, see "Display
indicators" on page 12.
Automatic answer
This feature allows you to automatically answer incoming calls
after the first ring whenever your car phone is on and off mode
is not active. You can switch this feature on or off as desired.
Caution!
If you activate this feature, you should make sure that
the ringing tone is set sufficiently loud to make you
aware of an incoming call. Otherwise, you may run the
risk of a caller listening in on conversations carried on in
the car.
To activate the automatic answer feature:
With the display in standby, press
Scroll to Settings, and press
Scroll to Call settings, and press
Scroll to Automatic answer, and press
Scroll to On or Off, and press
setting.
36
.
.
.
.
to select the desired
Call waiting (network service)
If the Call waiting feature is activated, you are notified of any
incoming call while you have another call in progress. This
feature allows you to accept this call.
To activate call waiting:
With the display in standby, press
Scroll to Settings, and press
Scroll to Call settings, and press
Scroll to Call waiting, and press
Scroll to the desired setting, and press
Select from the following options:
Activate
This option activates the call waiting service.
Cancel
This option deactivates the call waiting service.
Check status
This option lets you know whether this service is currently
active for your car phone.
Press to accept an incoming call while you are engaged
in an active call.
The first call is placed on hold.
Press to end a currently active call and to return to the
call on hold.
.
.
.
.
.