Connecting Cables To Staubli Mc4 Connectors - Huawei SUN2000-M3 User Manual

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual
Figure 5-13 Connecting the DC power cable
----End
During DC input power cabling, leave at least 50 mm of slack. The axial tension
on PV connectors must not exceed 80 N. Radial stress or torque must not be
generated on PV connectors.

5.5.3 Connecting Cables to Staubli MC4 Connectors

Use the positive and negative Staubli MC4 metal terminals and DC connectors
supplied with the SUN2000. Using incompatible positive and negative metal
terminals and DC connectors may result in serious consequences. The caused
device damage is not covered under warranty.
Issue 11 (2023-01-10)
NO TICE
CA UTION
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
47