Power-On Password Setting - Yolin YL81F User Manual

6.9.2 Throttle level setting
HF is the throttle Level setting. HF-Y is to enable the throttle level. When using the throttle, the max speed depends on
the throttle level. (0~3, 1~3, 0~5, 1~5, 1~7, 0~7, 0~9, 1~9) HF-N is to disable the throttle level. The speed is independent
with the throttle level and can reach the rated max speed.
Press the /
personalized parameter setting interface.

6.10 Power-on password setting

10P is the power-on password setting. The power-on password is not activated by default but users can activate it from
setting PSd-y. The factory default password is 1212. Users can set other four-digit password. Please keep the password in
mind after changing it, otherwise you will not be able to use the display.
Press to enter the parameter changing state. Press the
power-on password is activated while PSd-n is off. Press
digits power-on password or exit to the personalized parameter setting interface.
Remember your password
after changing it, or you will
not be able to use the meter!
to select the parameter and press
Figure 6-13 Throttle level setting
Figure 6-14 Password OFF interface
to save the parameter setting and
/ to select the parameter. PSd-y means the
to confirm the mode and enter the state of setting the four
Figure 6-15 Password Activated interface
14
to return to the