Throttle Level Setting; Power-On Password Setting - Yolin YL90T-H User Manual

6.9.2 Throttle level setting

HF is the throttle Level setting. HF-Y is to enable the throttle level. When using the throttle, the max speed depends on
the throttle level. (0~3, 1~3, 0~5, 1~5, 1~7, 0~7, 0~9, 1~9) HF-N is to disable the throttle level. The speed is independent
with the throttle level and can reach the rated max speed.
Press the /
personalized parameter setting interface.

6.10 Power-on password setting

PA is the power-on password setting. The power-on password is not activated by default but users can activate it from
setting PSd-y. The factory default password is 1212. Users can set other four-digit password. Please keep the password in
mind after changing it, otherwise you will not be able to use the display.
to select the parameter and press
Figure 6-13 Throttle level setting
to save the parameter setting and
14
to return to the