Advertisement
4. Function overview and functional area layout
4.1 Function overview
Display YL75E provides the following functions to meet the riding needs of users:
Battery level indicator
Assist level indicator
Fault indicator
4.2 Functional area layout
Plus/headlight button
Battery level indicator
Minus button
4.3 Button definitions
There are three buttons on the operating unit of display YL75E, i.e., the on/off button
minus button
.
5. General operation
5.1 Power on/off
By pressing and holding the button
will be turned on. In the power-on state, by pressing and holding the button
power-off state, the display will no longer use the battery power, and its leakage current will be less than 1uA.
If your e-bike is not used for more than 10 minutes, the display will be automatically powered off.
5.2 Headlight on/off
When the ambient environment is dark or when driving at night, you may turn on the headlights. By pressing and
holding the button
, the controller will turn on the headlights. By pressing and holding the button
will turn off the headlights.
5.3 Assist level selection
By pressing the button
three assist levels available, i.e., Low (L), Medium (M) and High (H).
Fig. 4-1 Functional Area Layout Interface of Display YL75E
, the display will start to work and the working power supply of the controller
/
, the e-bike assist level will be switched to change the motor output power. There are
, your e-bike will be powered off. In the
2
On/off button
Assist level indicator
, plus button
and
again, the controller
Advertisement
