Protecting The Phone With The Security Code; Access Codes - Nokia 7110 User Manual

Protecting the phone with the
security code
You can protect your phone against unauthorised use with the se-
curity code (security code). To do this, you need to set the menu
function Security level (4-5-5) to Phone or Memory.
• When set to Phone, the phone will ask for the security code
whenever a new SIM card is inserted into the phone. When set
to Memory, the security code is required to enter the phone's in-
ternal phone book.
The security code is also required for using some functions, for ex-
ample, to clear a the phone book or to restore the factory settings.
The security code is usually supplied with the phone (on an identi-
fication sticker). If not, contact your local dealer.
The factory setting for the security code is 12345. Change the code
within the menu 4-5-6 Change of access codes. Keep the
new code secret and in a safe place which is separate from the
phone.
Note: If you enter an incorrect security code five times in
succession, the phone is blocked and will not accept the cor-
rect security code for the next five minutes.
Tip: You can also restrict calls made from or to your phone if
supported by your network. See also Call barring
service (4-5-2), Fixed dialling (4-5-3) and
Closed user group (4-5-4) in the Settings chapter.

Access codes

The access codes that can be used to protect your phone and SIM
card against unauthorised use. Some of the access codes are also
required for using some functions. The access codes (except PUK
and PUK2 codes) can be changed by using the menu 4-5-6. See "Se-
curity settings (Menu 4-5)" on page 72.
©2000 Nokia Mobile Phones. All rights reserved.
Security settings
79