Advertisement
7. Set web authentication steps for POS system
Cerio's Web Authentication System consists of the controller and SP-800 + Printer; administrator
can use SP-800 remote control Cerio's controller to create an account and print out.
The architecture can refer to
"3. POS system
application" description
Set web authentication steps, as follows
(Take Cerio's DR-3000 as the case)
Steps1
Login SP-800 web interface to set IP address and set same network segment
You can refer to "
4.
Login management interface for
SP-800"
Steps2
If SP-800 with QR code Printer, administrator must set IP address for QR code Printer
(same
network segment for your network). You can refer to "
6. Install QR Code printer
"
Steps3
Login Cerio's Controller "DR-3000" page (Refer controller user manual) to enable RADIUS Server.
As follows
Please click menu "Account""RADIUS Server" for Cerio's DR-3000
Steps4
Set the connection between DR-3000 and SP-800. Please click menu "Account"" Thermal
Printer Setup" to enable function, as follows
Advertisement
