Advertisement
Steps6
The system time is very important, administrator must set system time is right. Please click
DR-3000 menu "System""Time Server" to set system time.
PS. Recommend select update the system time for the NTP Server
The above procedure will complete the DR-3000 setting
＃Enable Web authentication for Access Point
Hot spots web authentication architecture must be with combine Cerio's CenOS5.0 access point.
As follows
Steps7
Enable Web authentication for Cerio's CenOS5.0 Access Point. (You can refer user manual for
Access Point), As follows for Cerio's Access Point.
1) Enables web authentication function. Please click "System""Authentication" for Cerio's
Access Point.
2) Click Authentication button and enable the function.
3) Enable authentication for RADIUS Server and set IP address for DR-3000.
Advertisement
