Advertisement
1. Introduction
CERIO's Web authentication device of the special use network control server (SP-800), the SP-800
must connect printer. Administrator can use SP-800 to generate a new account for the remote
control Cerio's Web authentication device and print authentication account. You can refer to
SP-800-PRINTER and SP-800-QRCPRT for Cerio's .
Product Outward Appearance
2.
Product Front
1
4
(5) RJ-45 Ethernet Port
(6) Screw Terminal Block
(7) DC-JACK power port
(1) LED Indicator
Power: Power LED.
Status: Status LED, LED lights up status is working
Button lock LED
Lock:
Link/Act: Network connection status. A LED light up status is
connecting.
100M: Ethernet use 100Mbps will light up.
2
(2) Function number display.
(3) Control buttons.
- / +
: The buttons can control number for increase or reduce,
3
number display with set Cerio's Controller function dependent.
Print out: Click the button will print account ticket.
FUNCTION button:
Lock function: Press and hold about 5 seconds the Lock LED will
light up, it represents the key has been locked.
Locked eliminate function: Press and hold about 5 seconds the
Lock LED will off, it represents the key locked eliminate
Connection test function: After click "Function" button will
display number 1 and click "Print out" button the system can
print test information this means has completed.
Print information for Qty: Click "Function" button and select
number 8 or 9 can printer account Qty. No.8 can print "Early
Balance". No.9 can print "Current Balance" information.
CANCEL: Clears "Function" events
REPEAT: Print the previous ticket.
(4) Console 1-2 Port
. A light up status is locking.
5
7
6
Advertisement
