Advertisement
Printer Port：Please enter command port for QR Code Printer.
to
6. Install QR Code Printer
QR Code Type：Administrator can select print out size for QR code.
COM Port: Please select connection type for printer.
1. If use normal thermal printer and connect to com1 port of the SP-800, please select
COM1
2. If use QR Code Printer, please select RJ-45
New Lock Password：Enter pass key of the DR-3000 to connect SP-800
Description：Administrator can enter description.
Steps5
Setup internet time rules for package authentication type (DR-3000). Please click menu "Account"
"Package setup". As follows
Package Name: Administrator can set
Description:
Administrator can set the description
Traffic Volume: Administrator can set authentication account use traffic limit for the
rules.
Session Time: Administrator can set authentication account use session limit for the
rules. (After the account is signed in, the system will begin counting until the set time is used
up. The counting will stop when users log out, and begin counting again once the user signs
back in. )
Expire After: Administrator can set authentication account use how many hours
expire.(
After the account is signed in, the system start counted time until the end time.)
Expiration: Administrator can select Unlimited or Per Day or Until Time.
)
Identify name for the
package rules.
for package
(You can refer
rules.
package
package
Advertisement
