Page 2
Read all instructions before you use this device. Do not make any changes that are not described in this manual. If physical injury, loss of data, or damage is caused by failure to follow instructions, the warranty does not apply. Setup •...
Page 4
Projector x 1 Adapter x 1 Adapter AC cord x 1 Remote control x1 User manual x 1 Projector A1192 User Manual Overview Projector Front View Rear View...
Page 5
① Power ⑥ USB 2.0 port ② Lens ⑦ HDMI 1.4 port ③ Tripod Screw Hole ⑧ Led Indicator ④ Pads ⑨ IR Receiver ⑤ DC In ⑩ 3.5mm AUX Port Attention: Please do not look into the lens directly to avoid harm for your eyes.
Get started Placement ① Place the projector right towards the projection surface to get a rectangle picture. ② The distance between the projector and the projection surface ③ Prepare the Remote Control included). ① Press and open the battery cover, as illustrated. ②...
Select Your Language When start the projector for the first time, you will be guided to a page to select language, use remote control to select your language. Then Pair Remote Control in Bluetooth Mode After selecting a language, you will be at a Bluetooth remote pairing page, follow the instructions on the page.
Page 8
Settings Android TV Setting Bluetooth pairing TV interface, select Settings→Remotes&Accessories→Add accessory, then select the device to be connected. Bluetooth connection can only work while you are on the Android TV system. Android TV Remote App The Android TV system could be controlled by downloading the remote app on a smartphone.
Page 9
Zoom in/out without moving the projector. Keystone correction projected image is noticeably wider at one side. It occurs when the projector is not perpendicular to the screen. ① To correct the keystone effect, press the button to go to projector homepage, and select Settings→Projection Settings → Vertical Correction/Horizontal Correction to adjust.
Page 10
② the angle of the projection, select Settings → Four Point Correction, instructions to correct the image. Four Point Correction Keystone correction reset To restore the default settings, select Keystone Correction Reset Other settings Default Input Signal Screen Saver The screen saver automatically starts whenever your projector sits idle for the default time.
Page 11
Chromecast (wireless connection) The Chromecast feature only works while you are in the Android TV system. Cast from Chromecast-enabled sites/apps (for Android/iOS devices) ① ② ③ Cast from Chrome browser tab (for computers) ① ② Click "Cast" at the top right of the Chrome browser tab, and then choose from the sources whether you want to cast the tab or the screen.
③ ④ Press [OK] to start playing. 3. Connect to a headphone via AUX cable You can connect a headphone or speaker to ETOE Projector via AUX cable as well. ① Plug in the 3.5mm AUX cable connector to ETOE projector AUX port.
Warranty 30-Day Money-Back Guarantee for Any Reason purchase to receive a full refund for any reason. shipping costs. 12-Month Warranty for Quality-Related Issues model and cover any return shipping costs. FCC Notice including interference that may cause undesired operation. Warning: equipment.
Need help?
Do you have a question about the A1192 and is the answer not in the manual?
Questions and answers