Nokia 6230i User Manual page 64

M e n u f u n c t i o n s
phone or data device (for example,
a computer) through the IR port of
your phone.
Do not point the IR (infrared) beam
at anyone's eye or allow it to
interfere with other IR devices.
This device is a Class 1 laser
product.
When sending or receiving data,
ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
To activate the IR port of your
phone to receive data using IR,
select Menu > Settings
Connectivity > Infrared.
To deactivate the IR connection,
select Menu > Settings
Connectivity > Infrared. Select
Yes when the phone displays
Deactivate infrared?.
If data transfer is not started
within 2 minutes after the
activation of the IR port, the
connection is canceled and must
be started again.
IR connection indicator
• When is shown
continuously, the IR connection
is activated, and your phone is
ready to send or receive data
through its IR port.
64
Copyright © 2006 Nokia. All rights reserved.
• When
is trying to connect to the
other device, or a connection
has been lost.
(E)GPRS
General packet radio service
(GPRS) is a network service that
allows mobile phones to send and
receive data over an Internet
protocol (IP)-based network. GPRS
is a data bearer that enables
wireless access to data networks
such as the Internet.
Enhanced GPRS (EGPRS) is similar
to GPRS but enables faster
connections. For more information
>
on availability of (E)GPRS and data
transfer speed, contact your
network operator or service
provider.
>
The applications that may use
(E)GPRS are MMS, video
streaming, browsing sessions, e-
mail, remote SyncML, Java
application downloading, and the
PC dial-up.
When you have selected GPRS as a
data bearer, the phone uses EGPRS
instead of GPRS if this is available
in the network. You cannot select
between EGPRS and GPRS, but for
some applications you may be able
to select GPRS or
(circuit switched data, CSD).
blinks, your phone
GSM data