Table of Contents
Advertisement
PoC Guide
2.Testing Lists
2.1 Management
2.1.1 eWEB
Testing project
Testing purpose
Testing
procedure and
expected results
4
eWeb
Enable WEB and log into router successfully
1. Connect PC with EW through UTP cable as shown above. (in this
example, port Lan1 is connected)
2. Assign IP 192.168.120.2/24 to PC or set the DHCP mode to obtain
the IP address from EW1200G-PRO
3. Enter the default IP of Switch 192.168.120.1 in browser
Reyee EW PoC Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Reyee EW and is the answer not in the manual?
Questions and answers