Infrared Connectivity; Connection Indicator; Data Cable Transfer - Nokia 6165i User Manual

S e t t i n g s
video clips, and other types of data
transfers from another device with
Bluetooth connectivity. When you
receive a data transfer, an alarm
sounds, and a message appears in the
start screen.
To view the transferred item
immediately from the standby mode,
select Show. To view the item at a
later time, select Exit.
Depending on the nature of the item,
it is saved in the appropriate menu in
your phone. For example, a business
card would be saved in Contacts, and
a calendar note would be saved in
Calendar.

Infrared connectivity

You can set up the phone to receive
data through its infrared (IR) port. To
use an IR connection, transmission
and reception must be to or from an
IR compatible phone or device. The
Nokia 6165i cannot send or receive
images, photos, videos, music or
ringtones via IR connectivity between
phones or other devices.
Warning: Do not point the IR
beam at anyone's eye or allow
it to interfere with other IR
devices. This device is a Class
1 laser product.
Send and receive data
1. Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
58 Copyright © 2006 Nokia. All rights reserved.
there are no obstructions between
the devices.
The preferable distance between
the two devices in an IR
connection is from 3 inches to 3
feet.
2. To activate IR in your phone,
select Menu > Settings
Connectivity > Infrared.
3. The user of the other device
should activate IR as well.
If data transfer is not started within 2
minutes after the activation of the IR
port, the connection is cancelled and
must be restarted.

Connection indicator

• When is shown continuously,
the IR connection is activated and
your phone is ready to send or
receive data using its IR port.
• When blinks, your phone is
trying to connect to the other
device or a connection has been
lost.

Data cable transfer

To transfer data from your phone to a
compatible PC or from a compatible
PC to your phone, use a CA-53 USB
data cable. To disconnect the cable
from the device, hold the connector,
and remove the cable.
Important: Disconnect the
USB data cable from the
phone to make a call.
>