Lock Code Security Settings; Go To Functions - Nokia 6165i User Manual

P h o n e a t a g l a n c e
• Press the end key to return to
the standby mode from any
menu or submenu.
In-phone help
Many features have brief descriptions
(help text) you can view on the display.
To view these descriptions, you must
first activate help text as follows.
In the standby mode, select
Settings > Phone >
activation > On or Off.
Scroll to a feature and wait about 14
seconds. Scroll down to view all of the
description, or select
■ Lock code security
settings
Your device has a security option
allowing you to lock your phone with
a code. When the code is set and
turned on, no outgoing calls are
allowed and the menu cannot be
accessed without entering the correct
code first. This prevents unauthorised
outgoing calls or access to any
information stored on your device.
The Security option is in the
menu. The first time you access the
Security option, you must enter a lock
code. The default lock code may vary
depending on your wireless service
provider. The preset lock code may be
last four digits of your phone number,
1234 or 0000. If none of these work,
contact your wireless service provider
for help.
4 Copyright © 2006 Nokia. All rights reserved.
Menu >
Help text
Back to exit.
Settings
You must enter the lock code to
access the following
1. In the standby mode, select
Menu > Settings
2. Enter the lock code, and select OK.
See "Change lock code" on
page 61.

■ Go to functions

The Go to menu enables you to
change the function of the left
selection key on your phone. With this
function, you can quickly access your
most frequently used functions from
the Go to menu in the standby mode.
Choose Go to functions
1. In the standby mode, select
to > Options > Select
2. Scroll up or down to highlight the
desired function.
3. Select Mark to add a function or
Unmark to remove a function.
4. Select Done when you have added
all desired functions.
5. Select Yes to save the changes.
6. In the standby mode, select
to display a list of the functions
you selected in step 2.
Security option:
> Security.
Go
options.
Go to