Voice Commands And Voice Tags; Hands-Free Operation; Connection Indicator - Nokia 6155 User Manual

If data transfer is not started within 2
minutes after the activation of the IR
port, the connection is cancelled and
must be restarted.

Connection indicator

• When is shown continuously,
the IR connection is activated and
your phone is ready to send or
receive data using its IR port.
• When blinks, your phone is
trying to connect to the other
device or a connection has been
lost.
Voice commands and
voice tags
Before using voice tags, note the
following:
• Voice tags are not language-
dependent, but depend on the
speaker's voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
• Very short names are not accepted.
Use long names, and avoid similar
names for different numbers.
Copyright © 2005 Nokia. All rights reserved.
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.

Hands-free operation

You can set as many as 16 voice
commands to enable hands-free
operation of certain features in your
device.
Assign a voice tag to a
command
Before using voice commands,
you must first add a voice tag to the
device function.
1. In standby mode, select
Settings > Voice
2. Select the device function you
want to tag: Profiles,
mailbox, Radio, Voice recorder
Call register.
3. If necessary, select an option
associated with that function.
4. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit
to cancel the recording.
The device replays and saves the
recorded tag. appears next to
commands with voice tags assigned.
S e t t i n g s
Menu >
commands.
Voice
or
unless you want
53