Insert Dialling Codes - Nokia 6155 User Manual

Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Keep in mind that each voice mail
service may vary. However, it
should look similar to the
following:
Dial 8585551212, pause 5 seconds,
press 1, pause 2 seconds, press
1234, and press #.
Phone numbers with
dialling codes
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. To set up dialling
codes, do the following:
1. In standby mode, select
Contacts > Speed
2. Scroll to an (empty)
slot, and select Assign.
3. Enter your mailbox phone number,
including the area code.
Copyright © 2005 Nokia. All rights reserved.
4. Enter any dialling codes as
5. Enter any remaining pauses or
6. Enter a name (such as voice mail),
To dial and listen to your voice mail,
press and hold the assigned speed dials
key in standby mode.

Insert dialling codes

Press * repeatedly to cycle through
dialling codes. When the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
Menu >
dials.
The following dialling codes are
available:
speed dials
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
+—Replaced by the international
access code.
w—Waits for you to press the call key
before sending the numbers or codes
that follow.
necessary after the entered phone
number.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice (two times 2.5
seconds) after the voice mailbox
number: 2145551212pp.
other information that enables you
to listen to your messages, and
select OK.
and select OK.
M e s s a g e s
23