Connectivity; Infrared; Voice Commands And Voice Tags - Nokia 6155 User Manual

9243644_6155_en_au.fm Page 57 Wednesday, December 28, 2005 11:28 AM

■ Connectivity

Infrared

You can set up the phone to receive
data through its IR port. To use an IR
connection, transmission and
reception must be to or from an IR
compatible phone or device. You can
send or receive data such as business
cards, graphics, images, sound clips,
music files, videos, and calendar notes
to or from a compatible phone or data
device (such as a computer) using the
IR port of your phone.
Do not point the IR (infrared) beam at
anyone's eye or allow it to interfere
with other IR devices. This device is a
Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
The preferable distance between
the two devices in an IR connection
is from 3 inches to 3 feet.
2. To activate IR in your phone, select
Menu > Settings > Connectivity
Infrared.
3. The user of the other device must
activate IR as well.
S e t t i n g s
If data transfer is not started within 2
minutes after the activation of the IR
port, the connection is cancelled and
must be restarted.
Connection indicator
• When is shown continuously,
the IR connection is activated and
your phone is ready to send or
receive data using its IR port.
• When blinks, your phone is
trying to connect to the other
device or a connection has been
lost.
■ Voice commands and
voice tags
Before using voice tags, note the
following:
• Voice tags are not language-
dependent, but depend on the
speaker's voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
• Very short names are not accepted.
>
Use long names, and avoid similar
names for different numbers.
57