Technical Specifications; Safety Instructions - Parkside PPKS 35 B3 Operation And Safety Notes Translation Of The Original Instructions

z Technical specifications
Length:
Width:
Height:
Weight:
Cut diameter:
z Safety instructions
Never attach the magnets to the plas-
ma cutter itself or its housing� Before
using, please read the operating
instructions for the circle cutter PPKS
35 B3 and the operating instructions
for the plasma cutter you are using
in full� Do not put body parts (e�g�
fingers) between the magnets and the
magnetic surfaces�
Risk of crushing!
It is essential that you observe the saf-
ety instructions of your plasma cutter!
Check the circle cutter before fitting it
to the plasma cutter� Damaged com-
ponents must not be used�
20
GB
35,3 cm
4,2 cm
5,4 cm
approx� 310 g
approx� 15-60 cm