Advertisement
3. Access to the Camera
3.1 Accessing by Web Browsers
Steps:
1. Open the web browser.
2. In the browser address bar, input the IP address of the underwater
camera, and press the Enter key to enter the login interface.
3. Activate the underwater camera for the first time using, refer to the
Section 2 for details.
Note:
4. Select English as the interface language on the top-right of login
interface.
5. Input the user name and password and click Login.
The admin user should configure the device accounts and user/operator
permissions properly. Delete the unnecessary accounts and user/operator
permissions.
Note:
The IP address gets locked if the admin user performs 7 failed password
attempts
(5 attempts for the user/operator).
The default IP address is 192.168.1.64.
If the camera is not activated, please activate the camera first.
Figure 3-1 Login Interface
7
Advertisement
