Table of Contents
Advertisement
4.3 Access ways
Different network connection way can be selected to make the device access the platform according to the
requirements. Three ways are supported by the device to connect the network: cable/ WiFi /4G. Fast
switching can be realized via the 'network" button on the lower panel, and according to the display status on
the indicator panel to judge the connection way and connection status. The configuration modification also
can be realized via client/built-in webpage, the details are as below:
4.3.1 Cable access
Click
after login the built-in webpage, find the "network configuration" in the system, input the IP
address, subnet mask and gateway in the IP settings. Select "enable DHCP" if use the auto access way,
submit.
Select "use the cable" in the "preferred network", submit.
4.3.2 WiFi access
Click
after login the built-in webpage, find the "network configuration" in the system, and select "use
WiFi" in the "preferred network", submit.
Click WiFi option and select "enable WiFi', input the wireless network account and password, submit and
refresh. Observe the module status until the connection is successful. (Note: the hotspot function needs to be
shut firstly)
8
Advertisement
Table of Contents
