Approval label
Fig. 5
4.2 Outside air connection through
the base
Through a rear outlet
Jøtul F 520 is delivered with air inlet mounted underneath the
product. If needed, the air inlet may be mounted in the rear of
the product.
Fig. 6
•
Use a cutting pliar and cut along the knock-out holes.
Alternative through a rear outlet
Fig. 6b
Fig. 7
Click
•
Move the air intake connector from underneath the oven to
the back of the oven
•
For fastening Ø 80 / Ø100 fresh air intake tube (optional
equipment – item no. 51047509 / 51012164), see the
manual (item no. 10047508) accompanying the external
air set. See the installation instructions that follow with the
external air set. Attach the hose to the external air connector
with a hose clip to avoid using joints. The external air hose
insulation ends approx. 100 mm below the burn chamber.
ENGLISH
9