Connecting The Wso200; Figure 2 - Wso200 Interface Connector; Figure 3 - Nmea 2000 - Maretron WSO200 User Manual

WSO200 User's Manual

2.4 Connecting the WSO200

®
The Maretron WSO200 provides a connection to an NMEA 2000 interface through a connector
that can be found on the bottom of the device (see Figure 2).
Figure 2 – WSO200 Interface Connector
®
The NMEA 2000 connector is a five-pin male connector (see Figure 3). You connect the
® ®
WSO200 to an NMEA 2000 network using a Maretron NMEA 2000 cable (or compatible cable)
by connecting the female end of the cable to the WSO200 (note the key on the male connector
and keyway on the female connector). Be sure the cable is connected securely and that the
collar on the cable connector is tightened firmly. Connect the other end of the cable (male) to
®
the NMEA 2000 network in the same manner. The WSO200 is designed such that you can plug
®
or unplug it from an NMEA 2000 network while the power to the network is connected or
®
disconnected. Please follow recommended practices for installing NMEA 2000 network
products.
Figure 3 – NMEA 2000
®
Connector Face Views
Page 4 Revision 1.0