Table of Contents
Advertisement
1 Introduction
Congratulations on your purchase of the Maretron WSO200 Ultrasonic Wind / Weather Station.
Maretron has designed and built your WSO200 to the highest standards for years of reliable,
dependable, and accurate service.
The Maretron WSO200 is designed to operate within the harsh demands of the marine
environment. However, no piece of marine electronic equipment can function properly unless
installed and maintained in the correct manner.
instructions for installation and usage of the Maretron WSO200 in order to ensure optimal
performance.
1.1 Firmware Revision
This manual corresponds to WSO200 firmware revision 1.0.x
1.2 WSO200 Features
The Maretron WSO200 has the following features.
• NMEA 2000
®
• Ultrasonic Wind Sensor
• Field Replaceable Relative Humidity Sensor
• Barometric Pressure Sensor
• Temperature Sensor
• Waterproof Enclosure and Cable System
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron WSO200, you should find the following items:
1 - WSO200 Ultrasonic Wind/Weather Station
1 - Pole Mount Base
3 - Mounting Screws and Lock Washers
1 - WSO200 User's Manual
1 - Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
The selection of a suitable mounting location is important for the optimal performance of the
Maretron WSO200. The mounting location and orientation of the WSO200 should be:
1. Level with the earth's horizontal plane – This gives the WSO200 wind/weather sensor the
best accuracy of wind speed and direction over the widest range of heel angles.
Revision 1.0
Interface
Please read carefully and follow these
.
Page 1
Advertisement
Table of Contents
