Security; Phone And Sim - Nokia 3250 User Manual

Date separator — to select the date separator
Time format — to select between 24-hour and 12-hour time format
Time separator — to select the time separator
Clock type — to select whether the analog or digital clock is shown in the standby or active standby mode.
See Clock p. 82.
Clock alarm tone — to select the alarm clock tone
Network operator time
information to your phone. If you select Auto-update, all active connections are disconnected. Check any
alarms as these may be affected.

Security

Phone and SIM

You can change the following codes: lock code, PIN code, and PIN2 code. These codes can only include the
numbers from 0 to 9.
Avoid using access codes similar to emergency numbers, to prevent accidental dialing of the emergency
number.
To set the security settings, select
options:
Code in use — to select the active code,
supports UPIN, and the UPIN is not rejected.
PIN code request (or UPIN code
switched on. Some SIM cards may not allow the PIN code request to be turned Off. If you select
UPIN, UPIN code request
PIN code (or UPIN code)
(network service) — to allow the network to update time, date, and time zone
Menu > Tools
PIN or UPIN, for the active USIM. This is shown only if the active USIM
request) — to set the phone to request the code each time the phone is
is shown instead.
/PIN2 code /Lock code
Copyright © 2006 Nokia. All rights reserved.
> Settings > Security
— to change the codes
> Phone and SIM and from the following
Code in use >
101