Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ1000ES
Listening with BLUETOOTH headphones/speakers (Pairing operation)
You can listen to audio sources playing via this unit by using BLUETOOTH headphones/speakers.
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Set [Bluetooth Mode] to [Transmitter].
2
Turn on the BLUETOOTH headphones/speakers and set them to pairing mode.
3
Select the name of the headphones or speakers from the [Device List] in the [Bluetooth Settings] menu.
4
If you cannot find your device name in the list, select [Scan].
After [CONNECTING] flashes and the name of the headphone or speaker is displayed on the display panel, pairing is complete.
*
"XXXXXX" represents the name of a detected BLUETOOTH device.
Press one of the input buttons to select the input you want.
5
The sound is output from the BLUETOOTH headphones/speakers. No sound is output from the unit.
Adjust the volume of the BLUETOOTH headphones/speakers.
6
Volume control on the unit and remote control only works for the BLUETOOTH headphones/speakers.
Note
The BLUETOOTH device will be reconnected when [Bluetooth Mode] is changed from [Receiver] to [Transmitter]. Press BLUETOOTH TX/RX on the
remote control to reconnect quickly.
You can also press BLUETOOTH TX/RX on the remote control to switch [Bluetooth Mode]. However, you cannot switch [Bluetooth Mode] when [NOT
USE] appears on the display panel. Check if you are already using the Bluetooth function.
When a headphone is connected to the PHONES jack, BLUETOOTH headphones/speakers cannot be connected.
You may not be able to adjust the volume level depending on the BLUETOOTH receiver.
When [Bluetooth Audio] is selected as an input, you cannot set [Bluetooth Mode] to [Transmitter].
You can register up to 10 sets of BLUETOOTH device. If a 11th set of BLUETOOTH device is registered, the least recently connected BLUETOOTH
device will be replaced by the new ones.
This unit can display up to 15 detected BLUETOOTH devices in the [Device List].
You cannot change the settings of [Sound Field] and [360 Spatial Sound Mapping] in the options menu while transmitting sound.
Some content cannot be output due to copyright protection.
The audio output from the BLUETOOTH receiver may be delayed compared to that from this unit because of the characteristics of BLUETOOTH
wireless technology.
Audio cannot be output to BLUETOOTH devices that do not support SCMS-T.
No sound is output from the speakers or HDMI OUT jacks when BLUETOOTH receiver is successfully connected to this unit.
119
Advertisement
Table of Contents
