Load Shunt Bus Rearrangement
Sometimes it may be necessary to reconfigure a BDFB in the field. Two common changes are
converting two load BDFB's from top feed configurations to bottom feed configurations and
changing from a 2-load to a 4, 6, or 8-load BDFB. Additional Load Shunt Bus Kits as shown on Figure
3 and Figure 4 may be purchased separately.
Page 11
© Copyright 2021 ABB. All rights reserved.
Figure 4 Load Connection Points G101 AND G102
LOAD RETURN BUS DETAIL
3/8" HARDWARE PROVIDED
LOAD SUNT BUS DETAIL
3/8" HARDWARE PROVIDED