Subscribe to Our Youtube Channel
Related Manuals for FS TA1910-1GF-W
Summary of Contents for FS TA1910-1GF-W
- Page 1 TA1910-1GF-W USER MANUAL TA1910-1GF-W User Manual Copyright © 2009-2022 FS.COM All Rights Reserved.
-
Page 2: Table Of Contents
TA1910-1GF-W USER MANUAL Contents 1 FS TA1910-1GF-W User Manual .....................1 1.1 Introduction ..................................1 1.2 Hardware Connection ..............................1 1.3 Computer Setting ................................ 2 1.4 Wizard Setting ................................4 1.5 System Wireless Setting .............................. 5 1.6 User Tips ..................................7... -
Page 3: Fs Ta1910-1Gf-W User Manual
TA1910-1GF-W USER MANUAL 1 FS TA1910-1GF-W User Manual 1.1 Introduction FS TA1910-1GF-W is a high-end integrated broadband access device that is flexible and user-friendly, conforming to the IEEE802.11b/g/n standard. It can provide high-performance broadband access services for home users and individual businesses. -
Page 4: Computer Setting
TA1910-1GF-W USER MANUAL Flicker: The optical power received by the ONU is lower than the threshold of the optical receiver. Off: The system is not powered on or the wireless interface does not connect to any network device; WIFI Wireless status indicator... - Page 5 TA1910-1GF-W USER MANUAL Double click “Internet Protocol 4 (TCP/IPv4)” as shown in the following figure: On the page of Internet Protocol 4 (TCP/IPv4) Properties, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, and then click “OK”.
-
Page 6: Wizard Setting
TA1910-1GF-W USER MANUAL 1.4 Wizard Setting Open the web browser. Enter 10.0.0.10 in the address bar and click “Enter” to the the web interface. Then enter the UserName (admin by default) and Password (super&123 by default) respectively in the interface UserLogin. -
Page 7: System Wireless Setting
TA1910-1GF-W USER MANUAL On page of WLAN Basic Settings, you can tick or not tick Disable WLAN Interface to disable WiFi. And you can also modify the wireless name, authentication mode and password. Click "Apply Changes" to proceed to the next step. - Page 8 TA1910-1GF-W USER MANUAL Click “Wireless Network Connection”. Click the “Refresh” button, select the wireless network name of the terminal device, and double-click the name.
-
Page 9: User Tips
TA1910-1GF-W USER MANUAL Enter the password and click "OK". Reset Please reset your router if you forget its username and password. Reset method: Keep your router powered on and press the reset key “RESET” with a toothpick or a clip for 10 seconds and the router will reboot. - Page 10 TA1910-1GF-W USER MANUAL select “service” after the page is unfolded. Find “WLAN AutoConfig” and ensure it is enabled; check whether there is wireless signal if keep the laptop closer to the wireless router. retry to connect other wireless adapter card if the above solutions are unsatisfactory. If not, reset the...
Need help?
Do you have a question about the TA1910-1GF-W and is the answer not in the manual?
Questions and answers