Receiving The Memorized Stations - Sony CDX-C7000X Operating Instructions Manual

Receiving t he m em orized
st at ions
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ( (1) to (6) ) on
w hich the desired station is stored.
Tip
Press eit her side of (DISC/PRST) t o receive t he
st at ions in t he order t hey are st ored in t he
memory (Preset Search Funct ion).
If you cannot t une in a preset
st at ion
Press either side of (SEEK/AMS) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If t he aut omat ic t uning st ops t oo f requent ly, press
(MENU), t hen press eit her side of (DISC/PRST)
repeat edly unt il " LOCAL" (local seek mode) is
displayed. Then press t he (+) side of (SEEK/AMS) t o
select " LOCAL-ON." Press (ENTER).
Only t he st at ions w it h relat ively st rong signals w ill
be t uned in.
Tips
• When you select t he " LOCAL-ON" set t ing,
" L.SEEK" appears w hile t he unit is searching f or
a st at ion.
• If you know t he f requency of t he st at ion you
w ant t o list en t o, press and hold eit her side of
(SEEK/AMS) unt il t he desired f requency appears
(manual t uning).
16
Downloaded from: https://www.usersmanualguide.com/
If FM st ereo recept ion is poor
— M onaural M ode
1
During radio reception, press (MENU) ,
then press either side of (DISC/PRST)
repeatedly until "M ONO-OFF" appears.
2
Press the (+) side of (SEEK/AMS) until
"M ONO-ON" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (ENTER) .
To return to normal mode, select "MONO-
OFF" in step 2.
Aut om at ical recept ion f requency
adjust m ent
— IF AUTO function
If interference occurs, the "IF AUTO" function
of this unit will automatically avoid noise and
narrow the reception frequency. In such cases,
some FM stereo broadcasts may become
monaural. If you would like to hear such
broadcasts in stereo, manually switch to the
"WIDE" setting.
1
During radio reception, press (MENU) ,
then press either side of (DISC/PRST)
repeatedly until "IF AUTO" appears.
2
Press the (+) side of (SEEK/AMS) until
"WIDE"" appears.
3
Press (ENTER) .
Note
When you w iden t he f requency signal recept ion
set t ing (" WIDE" mode), some int erf erence may
occur.