Advertisement
•
How do I resolve issues with signal loss?
There is no way to know the exact range of your wireless network without
testing. Every obstacle placed between an Access Point and wireless PC will
create signal loss. Leaded glass, metal, concrete floors, water and walls will
inhibit the signal and reduce range. Start with your Access Point and your
wireless PC in the same room and move it away in small increments to
determine the maximum range in your environment.
You may also try using different channels, as this may eliminate interference
affecting only one channel. Also, due to FCC regulations, more power may be
transmitted, using 802.11a, on channels 52, 56, 60 and 64, than on the
lower channels. Lastly, check the Advanced tab of the Web-Based Utility and
make sure that FULL is selected in the Transmission Rate field.
•
Does the Turbo Mode work with Windows XP PCs?
No. The Turbo Mode does not work with Windows XP PCs.
© 2003 Cisco Systems, Inc. All Rights Reserved.
Troubleshooting
Slide 56
Model No:WAP55AG
Advertisement
Troubleshooting
