Cisco LINKSYS WAP55AG Manual page 28

IP Settings
• The
appear next. Enter an IP
Address, Subnet Mask, and
enter a unique access point
name.
• The IP Address must be
unique to your network. (The
Default IP is 192.168.1.246)
• The Subnet Mask must be
the same as your network.
• The Access Point name must
be unique, memorable names
are helpful. Specially when
setting up multiple access
points.
• Click the Next button to
continue.
© 2003 Cisco Systems, Inc. All Rights Reserved.
Device Configuration using Setup Wizard
screen will
Slide 28
Model No:WAP55AG