Cisco LINKSYS WAP55AG Manual page 33

• The WEP Security setting
screen will allow you to
enter your WEP key if a
passphrase was not
entered on the previous
screen. If a passphrase
was use the new WEP key
will appear on this screen.
• The WEP key can consist
of the letters "A" through
"F" and the numbers "0"
through "9" and should be
10 characters for 64-bit,
26 characters for 128-bit
encryption.
• Click the Next button to
continue.
© 2003 Cisco Systems, Inc. All Rights Reserved.
Device Configuration using Setup Wizard
Slide 33
Model No:WAP55AG