Cisco LINKSYS WAP55AG Manual page 39

Set-up Tab
• Firmware. This will display
the Access Point's current
firmware version.
• Access Point Name. You
may assign any name, which
is how the access point is
identified on your network.
• MAC Address. Displays the
MAC address of the LAN port.
• Configuration Type.
Displays how the IP
addresses are determined on
your network. Select from
Automatic Configuration
(DHCP), or Static IP
address.
© 2003 Cisco Systems, Inc. All Rights Reserved.
Device Configuration using Web Utility
Slide 39
Model No:WAP55AG