Front button
The front button is located above the three-position button.
The button is user-defined and can be controlled via wiring.
Attention!
This signal is not failsafe and must not be used for a safety function.
Note on activation of front button
The button must be pressed down vertically. If the angle exceeds 15° when actuating the switch, the switch
contact may be damaged, reducing it lifetime (number of switching cycles).
Top buttons
The two top buttons are located at the top part of the HD5.
The buttons are user-defined and can be controlled via wiring.
Button [S5] is marked -
Button [S6] is marked +
Attention!
This signal is not failsafe and must not be used for a safety function.
13
[S5]
[S6]