Advertisement
Quick Links
Advertisement
Related Manuals for RODE Microphones WirelessGo
Summary of Contents for RODE Microphones WirelessGo
- Page 1 Rode WirelessGo Microphone User’s Guide Rode WirelessGO User's Guide - Rev. 1.0 Page | 1...
- Page 2 WIRELESS MICROPHONE - QUICK START GUIDE Receiver Setup for Voice Amplification Receiver Setup for Zoom Transmitter Setup Rode WirelessGO User's Guide - Rev. 1.0 Page | 2...
- Page 3 Zoom presentation microphone within Chaffey College classrooms and labs. OVERVIEW The following document describes the features, connections and operation of the RODE WirelessGO microphone system. The microphone system is being implemented to provide enhanced presentation audio for Zoom and to supplement sound reinforcement in classrooms. Because of design constraints, the microphone system cannot be used for both at the same time.
-
Page 4: Transmitter (Tx)
The “Charge Status” LED will display charging mode while unit is off When connecting to a computer to charge – disregard the USB connection notifications. • A quick single press of the “Power Button” will turn on transmitter • Rode WirelessGO User's Guide - Rev. 1.0 Page | 4... -
Page 5: Receiver (Rx)
Used for charging with USB power supplies • • The screen will display charging mode and capacity while unit is off • A quick single press of the “Power Button” will turn on receiver Rode WirelessGO User's Guide - Rev. 1.0 Page | 5... - Page 6 Audio output level indicator shows setting level Minimally filled = -24dB Half-filled = -12db Solid = 0dB Pairing Status & Signal Strength Indicator • Solid - Shows relative signal strength Flashing – No transmitter detected Rode WirelessGO User's Guide - Rev. 1.0 Page | 6...