Table of Contents
Advertisement
* NOTE Damage to the draught stop due to
collision with seat backrests
The draught stop may collide with the front
seat backrests when fitted.
Adjust the backrest positions of the front
#
seats.
The folding draught stop is fitted over the rear
seats to protect against wind when you are driving
with the soft top open. Only the front seats can be
occupied when the folding draught stop is fitted.
When the folding draught stop is not in use, stow
it in the bag. The bag containing the folding
draught stop must be stowed securely behind the
folded-up rear seat backrests. If the through-load-
ing feature of the rear bench seat (EASY-PACK
Quickfold) is used, fasten the bag with the retain-
ing strap to one of the tie-down eyes in the boot.
You should preferably perform operations involv-
ing the folding draught stop on the side of the
vehicle facing away from traffic.
Open all side windows and the soft top.
#
Fold the rear seats forward to remove the bag.
#
Remove the folding draught stop from the bag.
#
Fold out folding draught stop
#
Fold out the two brackets
#
right.
Align brackets
#
with the two rear fixtures
1
as shown.
Opening and closing
93
2
on the left and
2
of folding draught stop
1
3
on the vehicle.
Advertisement
Table of Contents
