Table of Contents
Advertisement
Information about the pending system update
is displayed.
Later
R
The system update can be downloaded man-
ually at a later time.
Deep system updates
Deep system updates access vehicle or system
settings and can therefore only be carried out
when the vehicle is stationary and the ignition is
switched off.
If the download of a deep system update is com-
plete and the downloaded system update is ready
for installation, you will be informed of this after
the next ignition cycle, for example.
%
Park the vehicle safely in a suitable location
before starting the installation.
Requirements for the installation:
The vehicle is switched off.
R
Notes and warnings have been read and
R
accepted.
The electric parking brake has been applied.
R
If all requirements have been fulfilled, the down-
loaded system update is installed. The multimedia
system cannot be operated while the downloaded
system update is being installed and vehicle func-
tions are restricted.
If errors should occur during the installation, the
multimedia system automatically attempts to
restore the previous version. If restoration of the
previous version is not possible, a symbol appears
on the media display. Consult a qualified special-
ist workshop to resolve the problem.
Setting up a Wi-Fi hotspot
Requirements:
To set up the Wi-Fi connection of the multime-
R
dia system with external hotspots: your vehicle
does not have a permanently installed com-
munication module.
The device to be connected supports at least
R
one of the types of connection described.
MBUX multimedia system 267
Multimedia system:
©
Settings
System
4
5
5
Wi-Fi & Bluetooth
5
Activating/deactivating Wi-Fi
Select Wi-Fi.
#
Connecting the multimedia system with an exter-
nal hotspot using Wi-Fi
The type of connection established must be selec-
ted on the multimedia system and on the device
to be connected.
%
The connection procedure may differ depend-
ing on the device. Follow the instructions that
are shown in the display. Further information
can be found in the manufacturer's operating
instructions.
Select
Internet
settings.
#
Select
Connect via
Wi-Fi.
#
Select
Add
hotspot.
#
Connecting using a QR code
Select the options r of the desired Wi-Fi
#
network.
Advertisement
Table of Contents
