System Configuration; Connection; Power - SKAARHOJ RCP Pro User Manual

System Configuration

Connection

The SKAARHOJ RCP Pro communicates to
camera(s) via a network. No video signal
processing is done on the SKAARHOJ RCP Pro.

Power

• Use only the DC power adapter supplied with the controller. Do not use any other DC power adaptor
• If using PoE to power the controller, make sure the network switch supports 5W-30W PoE (+)/PoE
Standard: IEEE 802.3af/t
• Ensure the PoE provider has sufficient power budget to power the controller. Otherwise it will not
function properly
• Power Consumption: 6 Watts
The layout of the configuration for the RCP Pro is
done towards control of a single camera, but up
more cameras can be controlled from the same
RCP Pro (or any other SKAARHOJ controller).
7