Table of Contents
Advertisement
1
4
7
9
2
3
5
6
8
10
Front Panel Features
1.
AUX INPUT - 3.5 mm auxiliary line-level
input. The AUX input can be selected with
the remote control.
2.
HEADPHONE CONNECTOR -
1/4 inch stereo output jack for connecting a
nice pair of headphones.
3.
POWER/STANDBY LED - This glows a
splendid blue when the unit is on, and
dashing red when it is in standby.
4.
MENU - Press this button to access the
Setup Menu functions.
5.
DISPLAY - Press to cycle the display
through bright, dim, or off.
6.
INFO - Selects the information that appears
on the display of the unit (also used in
navigating the Setup Menu).
7.
INPUT (+ and – ) - These allow you to
select a source for playback (also used in
navigating the Setup Menu).
8.
MODE - Select between stereo and the
available surround modes (also used in
navigating the Setup Menu).
9.
SELECT - Used to enter selections you have
made in the Setup Menu.
11
14
12
13
10. DIRECT - When using stereo analog
11. MUTE - Mutes all analog outputs in the
12. ZONE - Select between the Main Zone and
13. LIGHT BAR - This front panel blue light
14. DISPLAY - This cool crisp display allows you
15. VOLUME - This hefty controller lets you
16. POWER BUTTON - This toggles the mains
X/XR Series Processors & Receivers
inputs, this button defeats all digital signal
processing and directs the analog input
from the selected source to the front
speaker outputs.
currently selected zone.
Zone 2 (Zone 2 not available on the XR-4).
bar is mined directly from the R-Coronae
Australis Nebula. The brilliance of this light
can be dimmed via a button on the back
panel.
to see the menu configuration options and
functions.
adjust the volume in the selected zone
(speaker outputs, line-level outputs, and the
headphone output).
power. Leave this in to control the standby
state via the remote or your automation
system.
Guided Tour
15
16
9
Advertisement
Table of Contents
