Table of Contents
Advertisement
Setup Menus
Network Settings
The Processor/Receiver has the ability of playing Internet radio stations as well
as music stored on a network storage device like a PC or USB flash drive. Its
default connection is wired and is set for DHCP - to automatically pick up an IP
address if there is a DHCP server on the network.
The Dirac Live room correction system requires the Processor/Receiver to be
connected to your network and with control set to IP.
Typically the computer network may use DHCP to automatically make the
necessary network settings although the Processor/Receiver can also be
configured manually when using a static IP address.
To set up a static IP or other manual entry IP address details, you will need to
navigate to the unit's IP address (go to Menu>Network to find it) then type
that IP address into a browser, then click on Network Settings for manual
configuration.
Bluetooth Settings
In this menu, Bluetooth pairing and device management are done.
X/XR Series Processors & Receivers
30
SSID (Information Only) - Shows the network connection type
IP Address (Information Only) - Shows the unit's IP address
MAC Address (Information Only) - Displays the unique network card
address of the Processor/Receiver
Friendly Name (Information Only) - Shows the name you've assigned
to the Processor/Receiver
Pair Device - Makes the Processor/Receiver discoverable by Bluetooth
devices
Clear Paired Device List - This will clear the paired devices in the
Processor/Receiver
Paired Devices - Paired devices are noted in this list
Advertisement
Table of Contents
