Table of Contents
Advertisement
2
Precautions for use
Important:
This kit is not immune to indirect electrostatic discharges. During the ESD test, the kit has obtained level C. This
means that the expansion board has not been damaged during the test, but the intervention of the operator was
necessary to reset it. When an electrostatic discharge is applied to an adjacent object, the board might interrupt
its functioning. In this case, the intervention of an operator is required to reset the board (that is, to unplug and
replug the power supply line).
If the board is attached to a
34-pin connector via software, by leveraging the power switch functionality of the
UM3021 - Rev 1
STEVAL-STWINBX1
(STWIN.box), you can control the power supply of the external
UM3021
Precautions for use
STBC02
battery charger IC.
page 3/16
Advertisement
Table of Contents
Need help?
Do you have a question about the STEVAL-C34KAT1 and is the answer not in the manual?