Siemens TC 863 Series User Manual page 16

en Preparing the appliance for first use
Drip stop
4
Filter housing, swivelling
5
Thermos jug with lid
6
Lid-opening button
7
Glass jug with lid
8
Warming plate
9
Cord storage compartment
10
Programming button
11
Descaling button
12
Start button
13
On/off button
14
Automatic switch-off indicator
15
Time display
16
Setting button Minutes
17
Setting button Hours
18
"aromaSense Plus" indicator
19
1
Depending on the model
Preparing the appliance for
first use
Notes
¡ Perform the first cleaning process with a
mixture of 5 cups of water and 1 cup of
vinegar.
¡ Before each rinsing process, press the
on/off button, leave the appliance to cool
down for 5 minutes and switch it on
again using the on/off button.
¡ Run the rinsing process twice using
6 cups of water without adding vinegar.
→ Fig. -
2 9
General information
¡ Observe the water level indicator on the
water tank. Do not fill the water tank any
higher than the top marking line.
¡ Add approx. 7 g medium-ground coffee
for each cup.
¡ Store ground coffee in a cool place or
freeze.
16
1
1
1
¡ Once a pack of coffee has been opened,
always close it tightly to preserve the
aroma.
¡ How coffee beans are roasted affects
their flavour and aroma.
– Darker roast = more flavour
– Lighter roast = more acidity
¡ Condensation may form on the filter
housing for technical reasons.
Brewing coffee
Follow the illustrated instructions.
→ Fig. -
10 16
Auto switch-off
Your appliance is equipped with an auto-
matic switch-off function that switches the
appliance to energy-saving mode after a
certain period of time.
Models with a thermos jug switch to energy-
saving mode a few minutes after the end of
brewing. Models with a glass jug keep the
coffee warm for approx. 40 minutes and
then switch to energy-saving mode.
The auto off indicator lights up until the cof-
fee machine automatically switches to en-
ergy-saving mode.
Timer function
Your appliance is equipped with a timer
function, which will start the brewing pro-
cess automatically at the required start
time.
Note: If the appliance has been completely
switched off with the on/off button or the
power supply has been disconnected, the
time on the clock and the start time will be
saved for around 4 days. After a lengthy in-
terruption the time on the clock and the
start time have to be reset.
Setting the time
Press h and min buttons at the same
1.
time.
a The display flashes.
Use the h and min buttons to set the cur-
2.
rent time.
a The time is set.