OPERATiON
4.
Connect the M.O.L.E.® Profiler to the sensors.
5.
Press the M.O.L.E.® Profiler "ON" button.
6.
Place the M.O.L.E.® Profiler in the appropri-
ate Thermal Barrier and press the "Record"
button.
7.
Close the Thermal Barrier making sure the
sensor wires do not get pinched and the latch
is secure.
8.
Pass the thermally protected M.O.L.E.® Profil-
er, and test product through the process.
When retrieving the M.O.L.E.® Profil-
er and test product use caution as it
may be warm.
dATA COLLECTiON
④
⑥
⑤
19