ECD BakeWATCH RACK OVEN V-M.O.L.E SYSTEM Quick Reference Manual page 11

3. On the M.O.L.E.® menu, click the Select
Instrument command.
4. Select the desired instrument from the
dialog box. If there are none displayed,
click the Scan for Instruments command
button to detect all available instru-
ments.
Once a M.O.L.E.® Profiler has been se-
lected, the software automatically selects
that M.O.L.E. Profiler if it used again on
the same COM port.
5. Click the OK command button to accept.
SETuP
③
④
⑤
COMMuNiCATiONS
10