STEP 1: SETuP iNSTRuMENT
1.
Open the M.O.L.E.® MAP software.
2.
Connect the M.O.L.E.® Thermal Profiler to the
computer.
3.
Make sure the M.O.L.E.® Internal Power Pack
battery is fully charged. When a M.O.L.E.® Thermal
Profiler is selected, the software status bar displays
the current battery voltage.
4.
Set an Environment. Either open an existing Envi-
ronment Folder or create a new one.
OPERATiON
④
③
SETuP iNSTRuMENT
12